Subscriber Module (SM)
The Subscriber Module (SM) is the subscriber termination unit. It consists of a single transceiver that operates with a 60-degree antenna. An optional reflector assembly, which will extend the range to 10 miles, is available (only on 5.7 Ghz models in FCC countries). SM synchronization and control is accomplished via the receiver AP signal. SMs may be located either indoors or outdoors, depending on the distance from the AP. Once the SM is initialized, it scans the RF channels and automatically registers and authenticates with the appropriate AP. Each SM requires a Category 5 cable with DC power supplied to the SM through that same cable. The SM kit requires a separate 110 or 220V power supply and associated RJ-45 connector to the MS.
 
Access Point (AP) more info
Backend Network more info